PHOTOS and MOVIES
Photo's are the property of Randy Huffine. If you wish to use them,
please request written permission
prior to use.
Cart used to carry High Banker related equipment to relatively easy access
areas. Use caution going down hill as this load is very heavy and can get
away from you and get yourself hurt or damage your equipment
The Dry Washer is used in dry areas where there is no water available.
Check
your concentrate often by panning a small amount of concentrate from
your Dry Washer cleanup to insure that you are still getting color. Don't
make the mistake I have made and work all day, not checking for color
and getting the concentrate home and not finding even a speck of color
The Vac Pak is used to clean up the surface under the area you have been Dry
Washing
to pick up any gold that you were unable to scoop up with a shovel before
leaving
the area you are working. I would highly recommend having one of these to
use in
any dry area you are dry washing. There are many uses for this tool
This is a Mini Sluice which can be used to run your Dry Washing concentrates
through
to remove more of the lighter material as to leave the gold and black sand for
further processing. The Mini Sluice can also be used in dry areas with
clay gone to
help settle the clay out of the material. I don't recommend using the Mini
Sluice
as your only tool in the dry desert as the water will get very dirty and thick
quickly
and defeat its purpose by not first running it through your Dry Washer. I
would
think this would work well for running samples of different spots, then panning
the
samples prior to setting up your dry washer
This is a Desert Fox. It works well to separate your concentrates
minimizing
black sand verses gold. You have to classify your concentrates down to
about
1/8 inch down to about 100 mesh and run the concentrates separately for
best results. I find that wetting the material with treated water, (Jet
Dry),
you will find you will have better results
This is a Blue Bowl which is used to run your fine concentrates through.
The
manufacture recommends that you run 30, 50 and 100 mesh concentrates
separately through this tool. You also need to use wet concentrates
with treated water (Jet Dry) to help eliminate your fines floating away
Thank you